Point gap for 1977 EZGO 2 stroke

[Gphox]

Does anyone no the point gap and correct way to set it for this old 2 stroke. I can figure it out by trial and error but would rather take the right approach. Can anyone point me towards and complete manual for this old thing.

Thanks

G-man

[DEWDIGGLER]

points set at .017 if new and .015 if old.
if your using old make sure there not pitted,
if they are you should file then smooth or replace them, and i would replace the condenser at the same time since your in there

good luck, Dew

[Gphox]

Thanks Dew!