91 2 Stroke Carb Adjustment

BgDaddy74 · 09-02-2009, 09:03 PM

Greetings, I'm new to the site and new to the Golf Cart addiction as I just purchased a 91 EZ Go 2 Stroker and ordered a new carb for it. I was hoping it would come "factory" set so I could bolt and go but found as I was going over the new one that the set screw was loose. My question is how do I know where to start with the adjustment? All the way in then three turns out? The new carb also came with a short small diameter hose that was not on the old carb, where is it supposed to go?

Thanks,
Shawn

Fleck · 09-02-2009, 09:29 PM

Good question.I'm working on my first gasser and had to replace the carb. The small tube is the over flow or vent tube. It connects to the top of the carb. Right or wrong; I adjusted the new carb by taking the drive belt off first. I started the motor and ran at low RPM. While running I adjusted the Air/Fuel scred till I ran smooth. Installed the drive belt and down the road I went

BgDaddy74 · 09-07-2009, 08:13 AM

Fleck,

Thanks, it worked like a charm and runs great. I noticed who ever owned it before me had the carb and oil linkage backwards, switched the carb linkage and got rid of the oil injection and HUGE improvement. Now I'm stripping it down for paint. I'll post pics when it's done.

Chuckwag · 10-10-2009, 11:14 PM

BgDaddy74:

I'm just getting started on this forum and also have a 91 2stroke...will be watching your threads alot to learn. Good luck with your tear-down!

Chuckwag

09-02-2009, 09:03 PM	#1
BgDaddy74 Not Yet Wild Join Date: Sep 2009 Posts: 2	91 2 Stroke Carb Adjustment Greetings, I'm new to the site and new to the Golf Cart addiction as I just purchased a 91 EZ Go 2 Stroker and ordered a new carb for it. I was hoping it would come "factory" set so I could bolt and go but found as I was going over the new one that the set screw was loose. My question is how do I know where to start with the adjustment? All the way in then three turns out? The new carb also came with a short small diameter hose that was not on the old carb, where is it supposed to go? Thanks, Shawn
BgDaddy74 Not Yet Wild Join Date: Sep 2009 Posts: 2

09-02-2009, 09:29 PM	#2
Fleck Gone Crazy Join Date: Nov 2008 Location: Pine Hill NJ Posts: 560	Re: 91 2 Stroke Carb Adjustment Good question.I'm working on my first gasser and had to replace the carb. The small tube is the over flow or vent tube. It connects to the top of the carb. Right or wrong; I adjusted the new carb by taking the drive belt off first. I started the motor and ran at low RPM. While running I adjusted the Air/Fuel scred till I ran smooth. Installed the drive belt and down the road I went

09-07-2009, 08:13 AM	#3
BgDaddy74 Not Yet Wild Join Date: Sep 2009 Posts: 2	Re: 91 2 Stroke Carb Adjustment Fleck, Thanks, it worked like a charm and runs great. I noticed who ever owned it before me had the carb and oil linkage backwards, switched the carb linkage and got rid of the oil injection and HUGE improvement. Now I'm stripping it down for paint. I'll post pics when it's done.
BgDaddy74 Not Yet Wild Join Date: Sep 2009 Posts: 2

10-10-2009, 11:14 PM	#4
Chuckwag Not Yet Wild Join Date: Oct 2009 Location: Georgia Posts: 12	Re: 91 2 Stroke Carb Adjustment BgDaddy74: I'm just getting started on this forum and also have a 91 2stroke...will be watching your threads alot to learn. Good luck with your tear-down! Chuckwag

Similar Threads
Thread	Forum
Carb Adjustment???	Gas golf carts
Carb adjustment for 23hp Vanguard	Big Block Talk!
83 g1 2 stroke carb problem	Gas Yamaha
carb for 91 2 stroke	Gas EZGO
2 stroke carberator adjustment	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum