Can I remove drive clutch while in cart?

tguellich · 04-20-2010, 02:43 PM

I want to replace the drive clutch with a Comet clutch #9035 in my 1993 2-cycle EzGo. Can I do the work without removing the engine from the cart?

EC-Cartman · 04-20-2010, 04:35 PM

Quote:

Originally Posted by tguellich

I want to replace the drive clutch with a Comet clutch #9035 in my 1993 2-cycle EzGo. Can I do the work without removing the engine from the cart?

Very few can be done without having dropping the engine cradle.
Most of the time you can't get the bolt out past the frame.
Here is an alternative. Cut the factory bolt in sections to remove it, then you need a removal tool ( because the clutch is pressed on the shaft). We cut ours down so it will go in in sections.
Down fall is you will need to buy a new factory retaining bolt to put the new clutch on (comes with some clutches)

04-20-2010, 02:43 PM	#1
tguellich Gone Wild Join Date: Apr 2010 Location: Born and raised in the state of Confusion Posts: 150	Can I remove drive clutch while in cart? I want to replace the drive clutch with a Comet clutch #9035 in my 1993 2-cycle EzGo. Can I do the work without removing the engine from the cart?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
how to remove the spider assembly on a g-16 clutch?	Gas Yamaha
Best way to remove driven clutch	Gas Club Car
how to remove the clutch ????	Gas Club Car
What thread bolts needed to remove rear clutch?	Gas Yamaha
How do I remove the driven clutch?	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum