|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-09-2011, 04:00 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Location: West Michigan
Posts: 46
|
G2 exhaust nut size
My exhaust nut rattled off being the previous owner neglected to put the lock washers back on the exhaust. Anyone know what size the nut is? I found it in the yamaha parts catalog but it only calls it nut and gives no size for it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-09-2011, 05:47 PM | #2 |
Gone Wild
Join Date: Apr 2010
Location: Interlachen,Fl
Posts: 326
|
Re: G2 exhaust nut size
I believe they are 10 mm nuts.
|
05-10-2011, 06:09 PM | #3 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: G2 exhaust nut size
Cylinder x Exhaust pipe-- Nut-- M8 x P1.25-- 8.75 ft lbs torque spec
I think it is 10mm wrench. |
05-10-2011, 07:24 PM | #4 |
Not Yet Wild
Join Date: Apr 2011
Location: West Michigan
Posts: 46
|
Re: G2 exhaust nut size
Thanks guys picked one up today.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
different exhaust on a g9 | Gas Yamaha | |||
81 exhaust problems, need exhaust stack | Gas EZGO | |||
G1 exhaust | Gas Yamaha | |||
18 / 20 hp exhaust | Big Block Talk! | |||
Exhaust | Gas EZGO |