|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-22-2011, 08:20 AM | #1 |
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
How do I remove the crank on a G14
I got burned on a golf cart I bought a couple weeks ago and now I am trying to fix it. The motor seized up after about 20-30 minutes of driving around and I thought about selling it and taking my loss. I later decided that I am going to take a look at it myself. I have removed the engine and started taking it apart and now I am stuck trying to open up the crank case. I have removed everything, including the fly wheel and clutch. I have the case opened up about 1/4 in and it wont budge past that. I guess I am not sure how to remove the drive pulley to be able to seperate the crank case. Any help would be greatly appreciated!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-22-2011, 08:55 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: How do I remove the crank on a G14
Never done it but I believe you still need to remove the drive pulley with a special puller. Then emery cloth the crank up to the seal to clean it, then the case side cover should slide off. Be carefull here as you want to keep the balancer shaft in place as you open it up so you can mark the teeth for timing purposes.
Good luck! |
05-22-2011, 10:46 AM | #3 |
Gone Wild
Join Date: Aug 2009
Location: Cedar Hill, Missouri
Posts: 290
|
Re: How do I remove the crank on a G14
where are you located. i have a complete motor i just took out of my g14. it is complete minus battery cables and fuel pump.
|
05-22-2011, 01:23 PM | #4 |
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
Re: How do I remove the crank on a G14
I'm located in Rockwall, TX. How much you want for it?
|
05-22-2011, 02:01 PM | #5 |
Not Yet Wild
Join Date: May 2011
Location: Dallas, TX
Posts: 40
|
Re: How do I remove the crank on a G14
Just PM me.
|
07-14-2011, 10:27 PM | #6 |
Not Yet Wild
Join Date: Jul 2011
Location: chicago
Posts: 41
|
Re: How do I remove the crank on a G14
|
07-15-2011, 08:05 AM | #7 |
Gone Wild
Join Date: Aug 2009
Location: Cedar Hill, Missouri
Posts: 290
|
Re: How do I remove the crank on a G14
yes just sitting in my garage. i was thinking looking for a cart with bad motor but doubt that will happen. what do you think its worth. im 30 min south of st louis. it ran fine when i took it out for the clone install.
|
07-15-2011, 10:32 AM | #8 |
Not Yet Wild
Join Date: Jul 2011
Location: chicago
Posts: 41
|
Re: How do I remove the crank on a G14
Email me samsmith87@gmail and we will talk.
|
07-27-2011, 05:54 PM | #9 |
Gone Wild
Join Date: Aug 2009
Location: Cedar Hill, Missouri
Posts: 290
|
Re: How do I remove the crank on a G14
sorry for the long wait just got back from virginia on vacation. i can get the motor to springfield,il. i would like to have 300 for it complete. it ran fine when i took it out just wanted the clone in it for more power. i was going to look for a cart with burnt motor for it but have not been able to find one for it around here in st louis.
|
Tags |
crank, drive, g14, yamaha |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Do I need to remove my motor?? | Gas EZGO | |||
aligment of cam shaft, crank, and crank balance on g14 | Gas Yamaha | |||
how to remove clutch | Gas Club Car | |||
How to remove this? | Gas Yamaha | |||
How to remove the | Electric EZGO |