|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-23-2011, 07:27 AM | #1 |
Not Yet Wild
Join Date: Mar 2011
Posts: 17
|
Problems After Torque Spring Install
so i installed my torque spring about a week ago and it seems to wear on belts really bad. there is a funky spot in it now that is vibrating like crazy. i ordered a new one just to try and i hope it works out. does it help to break in belts?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-23-2011, 10:45 AM | #2 |
G8 Club Founding Member
Join Date: Sep 2010
Location: Middle of Virginia, USA
Posts: 4,265
|
Re: Problems After Torque Spring Install
Belts shouldn't need to be broken in. Sounds like your clutches are not lined up correctly. Make sure your 'driven' clutch is put back together the way it came apart.
|
05-23-2011, 10:53 AM | #3 | |
Not Yet Wild
Join Date: Mar 2011
Posts: 17
|
Re: Problems After Torque Spring Install
Quote:
i know my secondary is put back together right. i think i might have burned the belt a little when i got stuck now that i think of it. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Torque Spring mod | Gas Yamaha | |||
Torque Lost afte Power Spring Install | Gas Club Car | |||
G1 and Torque Spring ?? | Gas Yamaha | |||
Torque spring | Gas Yamaha | |||
G9 torque spring problems. | Gas Yamaha |