lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-20-2012, 11:59 AM   #1
WyattG1
Not Yet Wild
E-Z-GO
 
Join Date: May 2012
Location: North Florida
Posts: 27
Default Need Help with Bolt Size and Thread

I have a 2002 ST480 with a 16hp Briggs Vanguard in it. I have an oil leak behind the flywheel so I need to remove the flywheel to replace the seal and bushing.

I have a steering wheel puller however none of my puller bolts will thread in easily. A 5/16 course thread will start and so will an 8mm 1.50 but neither will thread without force that I don't want to do. I have lubed the holes to no avail so I really need to know if the threads are metric or american and what pitch thread number it is. I don't want to screw up the threads if the are just dirty or rusty with a tap without knowing what tap to use.

Any help would be appreciated. I have goggled the web to no avail and even searched this website and found nothing.
WyattG1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-20-2012, 01:26 PM   #2
WyattG1
Not Yet Wild
E-Z-GO
 
Join Date: May 2012
Location: North Florida
Posts: 27
Default Re: Need Help with Bolt Size and Thread

Never mind my post above, I figured it out myself. Just in case someone goggles this same question it is a 5/16x18 thread pitch on the 16hp engine in my buggy.
Of course this goes with a disclaimer that I am not sure they are all that size but it worked on my application.
WyattG1 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
can't get clutch off (IS BOLT LEFT HAND THREAD)??? Gas Club Car
Clutch thread size ? Gas EZGO
What size thread for Primary Puller Bolt? Gas Yamaha
Clutch Bolt Thread Specs Gas Yamaha
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car


All times are GMT -5. The time now is 06:27 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.