|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
05-16-2014, 08:25 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2014
Posts: 1
|
Carryall 2002 starter /Gen work on bench not in cart!?
Hello,
Recently I purchased a Carryall cart that had the starter generator out. Previous owner said no good... Replaced the badly worn brushes and cleaned. Tested on the bench. 12V + to A-1 12V - to F-1 Jumper from A-2 to F-2 Motor turns well...  Installed in cart and know that battery is good. Can get contact to selinoid (clicks and 12V to other side). Problem Starter will not turn!? I have checked all Micro switches and they are functioning... Continuity through all wires check!? Not sure where to go... Can voltage regulator stop from turning? Something else I am missing... Anything to bypass to check? Anything would be welcomed and appreciated... Thanks to all in advance.... |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-16-2014, 06:08 PM
|
#2 |
|
Gone Wild
Join Date: Oct 2009
Location: Lee County, Georgia
Posts: 521
|
Re: Carryall 2002 starter /Gen work on bench not in cart!?
belt may be to tight. There is a fine line between too tight and too loose.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| bench test starter??? | Gas Club Car | |||
| Custom work bench | Garage and Workshop | |||
| Work bench cover | Garage and Workshop | |||
| How to bench test EZGO starter. | Gas EZGO | |||
| 88 starter generator bench test | Gas EZGO | |||
Linear Mode
