|
04-27-2016, 10:19 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 19
|
St 350 workhorse
Well guys I took my st350 to get motor worked on about 3 weeks ago.the dealer called me to say the top end was bad but the bottom end was good. Then called me back and said the head was bad, going to have to find one . Well I called him last week checking on it and he tells me he got it running and the timing chained broke. Well he calls me today and says it's ready and is running good.well then he tells me he put a different size head on it. I'm assuming a 295. And my total bill is 900 bucks. I'm stuck in a hard place about the diffrent size head being installed. I need some feed back before I go pick up please
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-29-2016, 05:13 PM
|
#2 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 19
|
Re: St 350 workhorse
Well I got my ride back today and it is sweet.10 times the power
|
|
|
|
|
04-29-2016, 07:48 PM
|
#3 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: St 350 workhorse
yep, lotta guys use the 295 head on a 350 for more compression..
 |
|
|
|
|
05-01-2016, 04:16 PM
|
#4 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 19
|
Re: St 350 workhorse
May have bragged to soon it's has went dead on me twice while driving and then give it a minute and it fires back up and keeps going any ideas?
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Cab for workhorse | Golf Carts and Parts | |||
| Ez-Go Workhorse 804 GXT | Gas EZGO | |||
| ez go workhorse | Electric EZGO | |||
| 1999 workhorse 1200 or 2006 workhorse 800, which one? | Gas EZGO | |||
| My workhorse | Lifted Golf Carts | |||
Linear Mode
