06-18-2016, 07:56 PM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 69
|
Clutch engage
Is the clutch suppose to engage as soon as you crank it or is it suppose to only when you give it gas??? Put a predator 301cc using factory clutch off robin 295cc 4 stroke. It engages automatically when I crank and won't idle at all
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2016, 12:54 PM | #2 |
Gone Wild
Join Date: May 2014
Location: Ohio
Posts: 185
|
Re: Clutch engage
It will engage only when you give it the gas. The drive clutch won't "spin in" to engage until it's reached a high enough rpm.
|
06-19-2016, 07:30 PM | #3 |
Not Yet Wild
Join Date: Jun 2016
Posts: 69
|
Re: Clutch engage
Think that's the problem...there is no idle adjustment on this engine and it's at high rpm and engaging the clutch due to it. Can't I put in a stiffer spring in clutch to help that out??
|
06-20-2016, 02:23 AM | #4 |
Gone Wild
Join Date: May 2014
Location: Ohio
Posts: 185
|
Re: Clutch engage
That I can not tell you, sorry. Hopefully someone else will have an idea.
|
06-20-2016, 08:22 AM | #5 |
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: Clutch engage
We offer a stronger spring that should help. You may also want to put a spring on carb pulling throttle stop againts screw.
https://www.cartpartsplus.com/perfor...-tuning-spring |
06-20-2016, 02:42 PM | #6 |
Not Yet Wild
Join Date: Jun 2016
Posts: 69
|
Re: Clutch engage
bigblock--thanks for the help---I sent you a private message with some questions also thanks in advance
|
|
|
Similar Threads | ||||
Thread | Forum | |||
clutch set up for Predator 420, what PRM to engage? | Clone Engine Swaps | |||
Why won't 98 clutch slide/engage after removal | Gas EZGO | |||
Clutch wont engage | Gas EZGO | |||
driven clutch will not engage | Gas EZGO | |||
not enough RPM - clutch won't engage | Gas Club Car |