|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-12-2017, 05:30 PM | #1 |
Not Yet Wild
Join Date: Dec 2017
Posts: 45
|
1989 EZGO engine cradle broken
hey there. I recently purchased a 1989 gas ezgo to do a restomod type thing. I thought I was in pretty good shape..... that is until I went to remove the engine and found that the cradle was split in half. this in itself is not an issue as I am a welder fabricator and can build another one no problem. the issue is that when I was mocking the old one up I noticed a bend in the forward section right around where the starter is mounted. both sides are bent this way. my question is: is the bend supposed to be there, if so what degree is it bent up.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-14-2017, 09:40 PM | #2 |
Getting Wild
Join Date: Jun 2016
Location: Indiana
Posts: 93
|
Re: 1989 EZGO engine cradle broken
Is this the bend you need degrees for?
Last edited by Granger ezgo; 12-14-2017 at 09:58 PM.. Reason: Spelling |
12-16-2017, 09:47 AM | #3 |
Not Yet Wild
Join Date: Dec 2017
Posts: 45
|
Re: 1989 EZGO engine cradle broken
that's exactly what I am looking for.
|
12-16-2017, 03:01 PM | #4 |
Getting Wild
Join Date: Jun 2016
Location: Indiana
Posts: 93
|
Re: 1989 EZGO engine cradle broken
Looks like it's 155*
|
12-16-2017, 08:33 PM | #5 |
Not Yet Wild
Join Date: Dec 2017
Posts: 45
|
Re: 1989 EZGO engine cradle broken
ty.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1989 ezgo gxt 800 3pg engine help | Gas EZGO | |||
engine cradle!! | Big Block Talk! | |||
WTB: 82 ezgo engine cradle | Golf Carts and Parts | |||
EZGO Big Block engine cradle | Golf Carts and Parts | |||
CPP engine cradle with an EZGO | Big Block Talk! |