|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-14-2018, 12:19 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Location: Lebanon, Pa
Posts: 11
|
Rear End fitment question
Asking because i'm not to sure..
Would a 2006 rear end and cradle from a 2006 workhorse go into a 1996 txt regular cart?? Both are Gas.. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-14-2018, 12:31 PM | #2 |
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,813
|
Re: Rear End fitment question
The engine cradle for the workhorse is longer. It would set the rear wheels back to about where the bumper is on the TXT. Of course anything is possible if you work hard enough to modify it to fit, but it would certainly NOT be a simple swap. If the TXT's cradle is still there & intact the transaxle could be made to fit, but you'd still have to work out the shift linkages.
|
02-14-2018, 02:15 PM | #3 |
Not Yet Wild
Join Date: Apr 2011
Location: Lebanon, Pa
Posts: 11
|
Re: Rear End fitment question
Thanks..
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Wheel Fitment Question | Electric EZGO | |||
Shifter Fitment question | Electric Club Car | |||
Club Car Headlight Fitment Question | Gas Club Car | |||
DS Replacement body fitment question | Electric Club Car | |||
Lifted G1 tire fitment question | Gas Yamaha |