|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-02-2014, 05:42 AM | #1 |
Getting Wild
Join Date: Jul 2010
Posts: 125
|
g1 crank seals replace one way valve
just replaced the crank seals and bearings on a g1 .while putting it together came across a 1 way valve that hooks up from the equalizer tube above the carb to the crank case. my valve was damaged. I placed it, to suck air from the crank case toward the intake.is that correct? to keep gas out of the system?
https://www.dropbox.com/s/h8vpyoenfs...16.26.jpg?dl=0 Thanks Dave |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
pulling clutch to replace seals | Gas Yamaha | |||
valve seals | Gas Yamaha | |||
replace seals in a 3 pg | Gas EZGO | |||
'96 G14 valve seals | Gas Yamaha | |||
Help with G1 Crank Seals | Gas Yamaha |