|
05-24-2016, 04:24 PM
|
#11 |
|
Gone Wild
 Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: Charger
The DPI accusence goes into float mode when charge is complete. Mine holds the pack at 52.6 in mode 2. If you were to disconnect the charger from the cart the pack would settle to ~50.9 after 10-12 hours. (assuming a good pack)
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-24-2016, 05:34 PM
|
#12 |
|
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Charger
That's the DPI charger. It gives you just a little bit extra charge. So after 18 holes I'm still at 95% or so. Before with my PD charger it would be down to about 75% or so. After 18 holes.
|
|
|
|
|
05-24-2016, 07:12 PM
|
#13 |
|
GONE WILD In Virginia
Join Date: Sep 2015
Posts: 198
|
Re: Charger
I guess I will get one and try it
|
|
|
|
|
05-24-2016, 07:24 PM
|
#14 | |
|
Guest
Posts: n/a
|
Re: Charger
Quote:
 |
|
|
|
|
05-25-2016, 06:53 PM
|
#15 |
|
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Charger
Ok. So I have a question. My PD charger is good and my obc is good. I thought I would just connect an extra wire from charge receptial to pack neg leaving all other wiring in place. The DPI charger works just fine this way, but today the yellow battery light came on. Did not effect the cart running, but I didn't like it. So this evening I unhooked the obc connection and put a jumper wire from blue to white wires then taped over the jumper and left the connector unplugged.
Question can I just leave it this way, so that if I ever sell my cart I can just remove the jumper and hook the connector back together. I will need to remove the extra wire from the charge port to pack neg as well. I sure hope it is that simple. It just seems too easy. |
|
|
|
|
05-25-2016, 06:58 PM
|
#16 |
|
Guest
Posts: n/a
|
Re: Charger
it is that simple
|
|
|
|
05-25-2016, 07:13 PM
|
#17 |
|
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Charger
Then why the hill did I wait so long to get a DPI
 Thanks for the quick answer. |
|
|
|
|
06-01-2016, 10:22 PM
|
#18 | |
|
Gone Wild
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,390
|
Re: Charger
Quote:
|
|
|
|
|
|
06-01-2016, 10:33 PM
|
#19 |
|
Guest
Posts: n/a
|
Re: Charger
we have a dpi on a 96 txt with jan 2015 batteries
it stays on charger nights and we use it about 5~6 miles it always shows 38.2 volts when i plug it in others do drop to 36.8v |
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Moving to a 48v charger on ezgo, 3 wires on plug, 2 on charger, will it work? | Electric EZGO | |||
| Powerwise charger w/ Club Car round three prong charger plug HOT!! | Electric EZGO | |||
| new batts and charger wont charge, charger works on other carts | Electric Club Car | |||
| How to hook up 12volt charger with 36 volt charger to charge 48 volts | Electric EZGO | |||
| converting an old style dial charger to a smart charger for Marathon | Electric EZGO | |||
Linear Mode
