|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-24-2016, 07:48 PM | #1 |
Not Yet Wild
Join Date: May 2016
Location: Southern Az
Posts: 7
|
Low End Torque Dump "Thunk"
Hey lads, into my first Golf Car, CC 2015 Precedent I2 Excel.
Local CC dealer just installed a speed package rom D&D Motors with 5062 motor, d&d 500amp controller, hd solenoid & wires. High end runs great but going slow, when you let off the acceleration, their is a loud "thunk" with a drop in the rear end. Feels like the torque unloads on the rear spring and pauses. Dealer can't get D&D on the line to trouble shoot. Any ideas? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-24-2016, 08:30 PM | #2 |
Voltaholic
Join Date: Dec 2013
Location: Close to Navasota Texas
Posts: 934
|
Re: Low End Torque Dump "Thunk"
Check your leaf spring bushings and shackle bushings.
|
05-25-2016, 11:36 AM | #3 |
Not Yet Wild
Join Date: May 2016
Location: Southern Az
Posts: 7
|
Re: Low End Torque Dump "Thunk"
I'm on my way to the dealer now. It's a brand new car but I'll check bushings, thanks!
|
05-25-2016, 02:32 PM | #4 |
Not Yet Wild
Join Date: May 2016
Location: Southern Az
Posts: 7
|
Re: Low End Torque Dump "Thunk"
D&D tech finally called with no help. Went to Altrax customer service and finally received knowledgeable assistance. Need to do some re-wiring and I'll update.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Club Car belt/clutch won't "change", as stuck in "low" gear | Gas Club Car | |||
Why "Carbon Fiber" "Wood grain" and Diamond Plated? | Gas EZGO | |||
Best "torque" motor | Extreme DC! | |||
Installed 15:1 torque gears need Help "soon" please | Electric EZGO | |||
Very "Jumpy" after Torque & Speed Upgrades | Extreme DC! |