|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-23-2016, 10:20 AM | #1 |
Not Yet Wild
Join Date: Jul 2013
Posts: 6
|
EZGO hub/spindle replacement
'96 EZGO TXT. Have had this cart for 15 years and a month ago replaced the rear hubs for the first time ever. Bought the higher quality hubs that BuggiesUnlimited had. One month later and they are stripped too. The "teeth" are nearly smooth. The axle spindles themselves look good. What the heck?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-23-2016, 11:02 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZGO hub/spindle replacement
Buggies Unlimited sells cheap China hubs. Even though they advertise HD they are no better than OEM, maybe worse!?
Find some Ausco replacement hubs #PK2126 and you will never buy another one. PS Put never seize on the splines when installing. AND REMEMBER torque the casle nut down to 100 ft #s or it will strip out....hope this helps |
07-23-2016, 11:04 AM | #3 |
Gone Wild
Join Date: Sep 2015
Location: North East, PA
Posts: 186
|
Re: EZGO hub/spindle replacement
Was it a good tight fit when you put the new hubs on? I haven't worked on my cart hubs however I know on my tractor I assumed the spindles looked good and they were actually worn when measured, needless to say I also smoked a new set of hubs after a few weeks due to wobble....
|
07-24-2016, 11:26 AM | #4 |
Not Yet Wild
Join Date: Jul 2013
Posts: 6
|
Re: EZGO hub/spindle replacement
Thanks guys. Do y'all suggest routinely replacing the spindles too? It seemed like a good fit at the time.
|
07-24-2016, 12:05 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZGO hub/spindle replacement
Not routinely but, they should be inspected for damage after a hub is stripped out and replace the axle if the splines are damaged.
|
07-24-2016, 12:36 PM | #6 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: EZGO hub/spindle replacement
Being that its the first time the hub stripped, chances are better that the hub was not properly torqued, which cased the second failure, not the replacement hub at fault.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
ezgo bent spindle maybe? | Electric EZGO | |||
spindle hub replacement cost question | Gas EZGO | |||
Spindle Bushing Replacement | Lifted Golf Carts | |||
Spindle Bushings, Replacement | Electric Club Car | |||
Spindle Bushing Replacement Issues | Electric Club Car |