G29 wheel spacers

Yamaha2000r6 · 05-13-2018, 05:28 PM

I just installed a 6 inch rokk spindle lift. It looks good and pushed the front tires out a good distance. However the front is now way wider than the rear. I’ve been eyeballing it trying to tell but what width spacers would I need for the rear to get all 4 tires on a similar track?

Dave in VA · 05-13-2018, 05:35 PM

I believe that 2" spacers will make the rear even to the front.

Then think about fender flares...

Shepard · 05-13-2018, 05:46 PM

Use a tape measure on the inside of the front wheels - what is the inside measurement? Do the same in the back - you'll have to lay on the ground to measure the inside and get a good number. Make sure you buy ones for a Yamaha cause there metric lugs and nuts -- lots of the others have 1/2-20 lugs and nuts.
One suggestion - use spacers only as wide as you need to correct the problem. 3 or 4 inch wide spacers pull a lot of pressure on the wheel bearing. You can stories of broken axles down in the big block page.

Yamaha2000r6 · 05-13-2018, 06:56 PM

Awesome...thank y’all so much I’ll start looking

Dave in VA · 05-14-2018, 06:33 AM

https://www.ebay.com/itm/2-0-Thick-4....c100005.m1851

Shepard · 05-14-2018, 09:55 PM

Yeah -- there's the ones I used.

05-13-2018, 05:28 PM	#1
Yamaha2000r6 Not Yet Wild Join Date: May 2018 Posts: 25	G29 wheel spacers I just installed a 6 inch rokk spindle lift. It looks good and pushed the front tires out a good distance. However the front is now way wider than the rear. I’ve been eyeballing it trying to tell but what width spacers would I need for the rear to get all 4 tires on a similar track?
Yamaha2000r6 Not Yet Wild Join Date: May 2018 Posts: 25

05-13-2018, 05:35 PM	#2
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	Re: G29 wheel spacers I believe that 2" spacers will make the rear even to the front. Then think about fender flares...

05-13-2018, 05:46 PM	#3
Shepard Crazy Ole Man Join Date: Jan 2016 Location: Owego NY Posts: 2,758	Re: G29 wheel spacers Use a tape measure on the inside of the front wheels - what is the inside measurement? Do the same in the back - you'll have to lay on the ground to measure the inside and get a good number. Make sure you buy ones for a Yamaha cause there metric lugs and nuts -- lots of the others have 1/2-20 lugs and nuts. One suggestion - use spacers only as wide as you need to correct the problem. 3 or 4 inch wide spacers pull a lot of pressure on the wheel bearing. You can stories of broken axles down in the big block page.

05-13-2018, 06:56 PM	#4
Yamaha2000r6 Not Yet Wild Join Date: May 2018 Posts: 25	Re: G29 wheel spacers Awesome...thank y’all so much I’ll start looking
Yamaha2000r6 Not Yet Wild Join Date: May 2018 Posts: 25

05-14-2018, 06:33 AM	#5
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	Re: G29 wheel spacers https://www.ebay.com/itm/2-0-Thick-4....c100005.m1851

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-14-2018, 09:55 PM	#6
Shepard Crazy Ole Man Join Date: Jan 2016 Location: Owego NY Posts: 2,758	Re: G29 wheel spacers Yeah -- there's the ones I used.

Similar Threads
Thread	Forum
Wheel spacers	Electric Club Car
Wheel stud spacers / or solid spacers	Gas EZGO
Jakes 2" billet wheel spacers & stud spacers	Golf Carts and Parts
Wheel spacers	Golf Carts and Parts
Wheel spacers?	Gas Yamaha