New G9 Owner

[Datfoolgoat]

So I just joined the cart community with a 95 G9. I have added a back seat and now the rear roof supports wont work anymore (they are the ones that bend back to the basket). I would like to use the rear supports that attach to the front seat back bracket. Is it possible to add those if they were not there before? I have searched for an answer but can't find anything. PICS are examples of what I have vs what I want.

[Kennzeichen]

There are 2 different tops for sure. They have different widths between the metal rails as well. I had an issue ordering a windshield once before because I had the other style top. You are better off running some new metal. I am unsure if anyone makes replacements. I do have some photos if you end up needing them. The design on the top you do not have, can easily be made with some aluminum square tubs, no welding needed.

[Datfoolgoat]

So I found a non sponsor that sells roof systems for G2-G9 carts. They told me that the rear supports I'm wanting to use will work for any of these carts roofs so I was able to order just a new set of the rear "straight" supports. I'll post some pics once i get them installed.

[QB100]

i had a g9 before my G29, roofs/supports/back seats are tough to find for these, probably due to the age of them.

also take care of those side pillars that cover the sides of the seats.. I lost one and they are also tough to replace.

Good luck

[CP241]

I just made my own from some other cart's roof supports (no idea what kind of cart they came from). I cut them up and made them fit, works great.

[Datfoolgoat]

Finally got around to installing the roof with the new straight supports.