|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-22-2014, 10:51 PM | #1 |
Not Yet Wild
Join Date: Apr 2014
Posts: 1
|
G14 Rear End Spacers?
Just purchased a stock G14 gas golf cart. I noticed that the rear tires rub the inside fender wells, has been for sometime based on the smoothness of the tire and black fender liner. The suspension also comes within about 1/2 an inch of the tire also. I checked out another G14 setting next to it and the wheels set out farther than mine...both were stock factory carts and rims. So my question is could there be a spacer missing on my cart? I could cut away the fender wells to stop the rubbing but the suspension seems really close which makes me think something's a miss.....any ideas?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-23-2014, 05:21 PM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G14 Rear End Spacers?
You might just need some standard wheel spacers. Another thing might be the offset on your current rims might put the wheel too far in. But wheel spacers are pretty inexpensive.
|
Tags |
factory, spacers, tire rub |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wheel stud spacers / or solid spacers | Gas EZGO | |||
spacers or stud spacers? | Gas EZGO | |||
What spacers should I use? | Lifted Golf Carts | |||
Rear Wheel Spacers? +'s, -'s? issues?'s | Electric EZGO | |||
Jakes 2" billet wheel spacers & stud spacers | Golf Carts and Parts |