|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-30-2009, 10:49 PM
|
#1 |
|
Gone Wild
 Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
G1 front hubs
Can anyone tell me where to get a set of king pins for my 81 G1? The drivers side front tire is leaning inward at the top, after jacking it up the wheel went to normal. Then after a hour of pounding the king pin is wore bad at the top and bottom thus making the wheel set inward at the top. Also what does it take to get the hubs off? We have pounded for over a hour on one of them and it still wont budge. On my 82 G1 the hubs came right off after the wheel nut was taken off. I also noticed on my 81 G1 it has no grease zerks on the front spindle so the king pins can turn easy. Any help will be greatly appreciated.
Calvin |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-31-2009, 05:01 AM
|
#2 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G1 front hubs
I got king pins and bushing for my G1 from http://www.cartpartsplus.com/
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
04-01-2009, 12:40 AM
|
#3 |
|
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: G1 front hubs
Thanks Ron I called Tom today and ordered them, do you have any idea on how to get the front hubs off? On my 82 G1 they slid right off but this 81 G1 I beat for a hour and got one off and the other one wont budge.
Calvin |
|
|
|
|
04-01-2009, 08:24 AM
|
#4 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G1 front hubs
Maybe this will help. http://www.tntgolfcar.com/yamparts.php?diagramid=632
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
04-01-2009, 11:15 AM
|
#5 |
|
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: G1 front hubs
Hi Ron and thanks but I have the manual for the G1 so I am guessing the bearings are rusted to the axel. Not sure yet it has been soaking in penetrating oil for almost 2 days now so I'll take another look at it today.
Calvin |
|
|
|
|
04-02-2009, 11:34 PM
|
#6 |
|
Gone Wild
Join Date: Nov 2007
Location: Martinsburg, WV
Posts: 651
|
Re: G1 front hubs
Hi Ron well I got the hubs off the inner bearing was rusted to the axel. I had to break them out then grind off the center. So I ordered now one and cleaned up both axels real good now their nice and shiney and oiled up real good. When the parts get here I will place some grease on everything. Appreciate your help Ron, at least when I get this little work done I will at least have one G1 to play with this summer. My other G1 is the one I am customizing and hopefully have it finished before winter this year. I had a friend help me and I built a nice wood stove for the garage and hooked it up today and tested it out and wow did it heat the garage up nice and quick. Now I wont have cabin fever next winter.
|
|
|
|
|
04-03-2009, 06:37 AM
|
#7 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G1 front hubs
Glad to hear you got them off. Nice wood burner!! That's what I need.
 |
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G22 front end | Gas Yamaha | |||
| add on front brakes | Gas EZGO | |||
| ATV front end? | Lifted Golf Carts | |||
| front cowl for G1 | Gas Yamaha | |||
| Wheel hubs | Electric Club Car | |||
Linear Mode
