|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-29-2021, 05:39 PM | #81 |
Not Yet Wild
Join Date: Jul 2009
Posts: 26
|
Re: G1 Thread: Everything About G1's for Newbies
Possible cheap (19 Bucks) trigger coils G1. My trigger coil is good but for this price I though what the heck I just ordered one of these potential trigger coils for my G1 golf cart for a spare and am hopping it will fit/bolt up. I would have to solder the original 2 wires to it that normally go to the OEM G1 trigger coil one is green and white and the other wire is red and white but I can live with that. I am getting ready to put new Yamaha crank seals in and will check to see if this will bolt up when I do so. I will report back to let others know if it fit and if it works producing spark.
If they run out or if link dies look up this part. Yamaha part PWC 6M6855800000 / 6M6-85580-00-00 I hope this helps someone, Joe https://www.amazon.com/dp/B08WHH9YRV...v_ov_lig_dp_it |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-29-2021, 06:49 PM | #82 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: G1 Thread: Everything About G1's for Newbies
This seller has listings for both the source coil and pulsar coil for the G1
https://www.ebay.com/itm/27478964720...0df2%7Ciid%3A1 |
08-29-2021, 08:38 PM | #83 |
Not Yet Wild
Join Date: Jul 2009
Posts: 26
|
Re: G1 Thread: Everything About G1's for Newbies
Thanks for the info. I was wanting an extra trigger coil for a good price since mine is good and am hoping this one will work for 19 dollars once I re-solder a couple wires to it. I will take some pics once I do the mod to it. I was thinking if someone needed one 19 bucks beats over 100 bucks for someone on a limited budget.
Joe |
06-02-2022, 03:45 PM | #84 | |
Not Yet Wild
Join Date: Aug 2019
Location: Ontario Canada
Posts: 4
|
Re: G1 Thread: Everything About G1's for Newbies
Quote:
I plan on replacing all the joints from there. |
|
06-23-2022, 07:30 PM | #85 |
Not Yet Wild
Join Date: Jun 2022
Posts: 1
|
Re: G1 Thread: Everything About G1's for Newbies
Recently bought an 80 g1. It had a bad reverse solenoid the original square top ones. I replaced them with the white Rodgers solenoids and now have nothing. Followed the wiring procedure that is posted on this thread. Any ideas of what could be wrong?
|
08-03-2023, 06:20 AM | #86 |
Not Yet Wild
Join Date: Aug 2021
Posts: 1
|
Re: G1 Thread: Everything About G1's for Newbies
Just picked up a 1986 G. I would like to replace the front seats. I've been looking but can't find a source for them. Does anyone know of a source or even another seat that will fit nicely in the G1?
|
08-04-2023, 06:22 PM | #87 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: G1 Thread: Everything About G1's for Newbies
I don't know of anyone who has replacement seats that are the same as the ones that came on it. With that said you have a couple options. I have seen people use boat seats and some are very nice. I personally found a bench seat kit for mine a few years back, it was great, I think I paid $300 for it online. Today prices are all over the place, although I have seen some kits.
|
08-04-2023, 06:29 PM | #88 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G1 Thread: Everything About G1's for Newbies
I saw seat from a "Coleman" go cart that looked pretty cool
|
08-04-2023, 07:14 PM | #89 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,647
|
Re: G1 Thread: Everything About G1's for Newbies
A whole lot of nice boat seats out there
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2 More G1's | Gas Yamaha | |||
newbies first cart | Gas EZGO | |||
For Newbies Only!! | Lifted Golf Carts |