|
Extreme DC! Extreme Electric Golf Carts! |
|
Thread Tools | Display Modes |
06-04-2012, 08:32 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 37
|
PQ executioner. 14 mph. Something is wrong
Okay.....
Bough the allrax 500 and the executioner for sale on here. Installed both, was seeing 26mph with stock wheels/tires... I was expecting a bit more, but the real problem was my notchy MCOR- I couldn't dial out the jerky takeoff no matter how I adjusted everything. I have to go offshore tomorrow, and there's no way I was going to leave the cart with my wife as it was, so I re-installed the stock curtis controller... and I guess I got encoder-regulated back down to 14 mph. (speed code 3) I thought the executioner would come with the magnet that fools the controller into allowing speeds past what speed code is set in there?? Help. Greg |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2012, 08:50 PM | #2 |
Gone Wild
Join Date: Feb 2011
Location: Louisiana
Posts: 179
|
Re: PQ executioner. 14 mph. Something is wrong
What kind of cart is this? Im assuming club car?
|
06-04-2012, 09:01 PM | #3 |
Not Yet Wild
Join Date: Jun 2011
Posts: 37
|
Re: PQ executioner. 14 mph. Something is wrong
Sorry, yes. A precedent ..
|
06-04-2012, 10:15 PM | #4 |
Gone Wild
Join Date: Feb 2009
Posts: 501
|
Re: PQ executioner. 14 mph. Something is wrong
Do you feel the regen braking kicking in? If so then it could be the magnet, if not your MCOR isn't going to 100% throttle..........if it's the magnet I can send you a replacement at no charge, you can pm me and I'll do what I can for you to make sure you get the right one.
|
06-04-2012, 10:16 PM | #5 |
Not Yet Wild
Join Date: Jun 2011
Posts: 37
|
Re: PQ executioner. 14 mph. Something is wrong
something to note: I may have wired the motor backwards- with the alltrax, I was getting half speed. I had to disable the 1/2 speed reverse.. can you wire the motor backwards, without having the F1 and F2 connections backwards? Should be easy enough to swap leads to test...???
|
06-04-2012, 10:22 PM | #6 |
Not Yet Wild
Join Date: Jun 2011
Posts: 37
|
Re: PQ executioner. 14 mph. Something is wrong
I don't think it's the MCOR, as per GPS it will actually run up to 16mph, and then 'regulate' itself back down to 14 or so... very odd.
|
06-04-2012, 10:50 PM | #7 | |
Gone Wild
Join Date: May 2012
Posts: 205
|
Re: PQ executioner. 14 mph. Something is wrong
Quote:
Great service (everyone should take note) and this is a second hand motor...... My hat's off to PQ! |
|
06-04-2012, 10:55 PM | #8 |
Not Yet Wild
Join Date: Jun 2011
Posts: 37
|
Re: PQ executioner. 14 mph. Something is wrong
No kidding! Vendor support like this is special.
|
06-05-2012, 06:38 AM | #9 |
Gone Wild
Join Date: Feb 2011
Location: Louisiana
Posts: 179
|
Re: PQ executioner. 14 mph. Something is wrong
Plum Quick great service and a great product.
|
06-05-2012, 08:16 AM | #10 |
Gone Wild
Join Date: Feb 2009
Posts: 501
|
Re: PQ executioner. 14 mph. Something is wrong
If your cart ID starts with PH, PD or PU..........that's the issue, it has a Excel (gray) controller. The Excel controller has extra regen braking that has to be turned off.. the high speed magnets don't trick the Excel controllers.......FSIP can remove ALL regen braking from these controllers.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Plum Quick Executioner & Alltrax DCX500 | Golf Carts and Parts | |||
Plum Quick Bandit + 500 AMP Controller OR Executioner w/ Stock Controller | Electric Club Car | |||
Install a new PQ Executioner motor here is my plan | Electric EZGO | |||
What am i doing wrong??? | Electric EZGO | |||
What Did I Do Wrong ? | Electric EZGO |