|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
|
|
01-22-2018, 07:34 PM
|
#1 |
|
Gone Wild
 Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Voltage Reducer wiring through Key Switch
Can anyone point me to the correct way to hook up a voltage reducer through the key switch if I do not have the remote wire?
And I just run the positive side through it before going to the battery? Sent from my iPhone using Tapatalk |
|
|
|
01-22-2018, 07:50 PM
|
#2 |
|
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: Voltage Reducer wiring through Key Switch
Due to the potential amp draw of the reducer, you should probably utilize a relay that is powered by the key switch. The key switch is not rated for a load that exceeds more than a couple amps.
|
|
|
|
|
01-22-2018, 07:58 PM
|
#3 |
|
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Voltage Reducer wiring through Key Switch
Something like this?
Potter & Brumfield Relay 30 Amp: 36 Volt https://www.amazon.com/dp/B00JRFFHL6..._jIOzAbCTSNFCN Sent from my iPhone using Tapatalk |
|
|
|
|
01-22-2018, 08:14 PM
|
#4 |
|
Gone Wild
Join Date: Jan 2017
Location: Miami, FL
Posts: 1,061
|
Re: Voltage Reducer wiring through Key Switch
I think so but I would order from the site sponsors since I know for a fact they sell the right ones. IIRC, Carts unlimited and Revolution both carry them.
Sent from my iPhone using Tapatalk |
|
|
|
|
01-22-2018, 08:16 PM
|
#5 |
|
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Voltage Reducer wiring through Key Switch
[emoji1303]
Sent from my iPhone using Tapatalk |
|
|
|
|
01-22-2018, 08:23 PM
|
#6 |
|
Gone Wild
Join Date: Nov 2016
Location: near Calgary, AB, Canada
Posts: 1,467
|
Re: Voltage Reducer wiring through Key Switch
If your are going to install a Relay, then you need to read these two posts which have lots of great information for a similar application:
http://www.buggiesgonewild.com/elect...-up-light.html http://www.buggiesgonewild.com/attac...connection.jpg |
|
|
|
|
01-23-2018, 09:26 AM
|
#7 |
|
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Voltage Reducer wiring through Key Switch
Thanks. Now I may have to install reverse lights!!
Sent from my iPhone using Tapatalk |
|
|
|
|
01-23-2018, 12:22 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 72,487
|
Re: Voltage Reducer wiring through Key Switch
Our new blue reducer has the keyswitch on/off plus it has a low voltage radio memory lead
 We offer it with or without the 6 place fuse panel and negative grounds bus bar. |
|
|
|
|
01-23-2018, 02:30 PM
|
#9 |
|
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Voltage Reducer wiring through Key Switch
i already have all the parts, just need a wiring diagram for the key switch relay so the key can cut power to the voltage reducer
thank you in advance |
|
|
|
|
01-23-2018, 04:09 PM
|
#10 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 72,487
|
Re: Voltage Reducer wiring through Key Switch
I hope this helps
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| voltage reducer/key switch help | Electric EZGO | |||
| Question about wiring voltage reducer and voltage meter to key switch | Electric EZGO | |||
| Wiring for Voltage Reducer/New Key Switch | Electric EZGO | |||
| Voltage Reducer to Tow switch | Electric Club Car | |||
| Wiring Voltage Reducer to Key Switch | Electric EZGO | |||
Hybrid Mode