![]() |
![]() |
#1 |
Not Yet Wild
Join Date: Oct 2014
Posts: 53
|
![]() Okay so i got a star cart for free and am putting it back together, I picked up a navitas controller 600amp with the on the fly programmer and a carts unlimited mzj400 solenoid im stuck on hooking up the solenoid
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#3 |
Not Yet Wild
Join Date: Oct 2014
Posts: 53
|
![]() Or maybe someone can shoot me a pic of there controller trying to figure out where this color wire goes, its RED with a blueish stripe and a 18 yellow plastic piece over it has a controller sized ring terminal
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: Oct 2014
Posts: 53
|
![]() okay I figured out where the wires supposed to go, it runs from the controller up to the dash and is supposed to hook up to a relay for the lights.
NOW the last thing to hook up is my solenoid, The stock one has a yellow wire and a black with white stripe my guess is the yellow is positive and the black/white is negative? |
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
Join Date: Jun 2015
Posts: 53
|
![]() I have a Zone Electric which is pretty much a Star. Where is your Star's solenoid located, under the back seat?
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Oct 2014
Posts: 53
|
![]() yes its right next to the controller here is a stock setup minus the orange solenoid.
https://www.nocoev.com/product/1268-5403_assemblage.htm the solenoid below is the one im using http://nebula.wsimg.com/8b14f7ec5ab6...&alloworigin=1 |
![]() |
![]() |
![]() |
#7 |
Not Yet Wild
Join Date: Oct 2014
Posts: 53
|
![]() okay so i picked up another STAR cart for $500 lol it was going 25mph put my big rims on got upto 30mph I also installed my navitas controller and on the fly programmer SWEET now i know how to wire up my other STAR cart got the 400amp out of the cart i bought for $500
|
![]() |
![]() |
![]() |
#8 | |
Not Yet Wild
Join Date: Jun 2015
Posts: 53
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Not Yet Wild
Join Date: Oct 2014
Posts: 53
|
![]() I guess the guy is picking up two hummer carts and needed the room i'm not going to sell it quite yet i'm having to much fun with it lol could use a paint job which i'm having done this summer for $400 two tone to match seats and rims plus I still have my other star cart that i need to put back together. which should be a breeze now that i have a running star to reference from
|
![]() |
![]() |
![]() |
#10 |
Not Yet Wild
Join Date: Sep 2022
Posts: 1
|
![]() I have the same cart, it’s 48v it blows the 10 amp fuse while it’s running on reverse, if I am going on forward it will go just fine with no issues, only on reverse it will do that, just recently put a brand new solenoid.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Upgrade to 4ga all around or just on batt pack and to controller & Solenoid | Electric Club Car | |||
Star Car Controller problems | Star and Fairplay | |||
upgrade controller, solenoid, f/r switch now won't go | Electric Club Car | |||
HELP! Need advice with wiring a 36V Controller/HD Solenoid upgrade!!!!!! | Electric Club Car | |||
Controller & Solenoid upgrade | Electric EZGO |