|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
11-21-2016, 11:11 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2016
Posts: 7
|
2004 TXT wiring after motor change
I dropped a new motor in, wired up and the cart goes forward in reverse, and backwards in forward. I chased all wire terminations back to controller and battery and all looks good. Any suggestions?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-21-2016, 12:10 PM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2004 TXT wiring after motor change
You need to swap where a couple of the cables on the motor are connected.
What drive type, Series or PDS? |
|
|
|
|
11-21-2016, 11:53 PM
|
#3 |
|
Not Yet Wild
Join Date: Nov 2016
Posts: 7
|
Re: 2004 TXT wiring after motor change
It is a PDS... Had to swap A1 and A2... all good.
|
|
|
|
|
11-22-2016, 10:10 AM
|
#4 |
|
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2004 TXT wiring after motor change
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2004 PDS wiring... | Electric EZGO | |||
| Wiring ? 2004 EZ go | Electric EZGO | |||
| 2004 TXT PDS Gear Ratio change help | Electric EZGO | |||
| EZGO lightbar change wiring help | Electric EZGO | |||
| 2004 Villager 6 Wiring - Motor | Electric Club Car | |||
Linear Mode
