|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-21-2016, 09:38 PM | #1 |
Not Yet Wild
Join Date: Nov 2016
Location: Martin, Ohio
Posts: 6
|
Install cup holders
Just received my 2016 s4 high output limited today and purchased cup holders from EZGO. I've heard horror stories on how this tend to twist out and not hold up due to pressure as people exit the cart. Does anyone know any tricks on how to avoid this? One suggestion I've heard is to us a piece of angle iron to help provide support.
Any suggestions you can provide are greatly appreciated. Thanks in advance. mark |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-22-2016, 10:25 AM | #2 | |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: Install cup holders
Quote:
You purchased them from Ezgo direct? The ones I've installed made by Eagle (Ezgo) have been fine. It's those cheap Epay ones from China that tend to warp quickly. I have in the past used steel on the bottom of the wood for added support on both models with no trouble. Enjoy the machine, plenty of fun, just stinks you're limited to 15mph with the H.O. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Cup holders | Golf Carts and Parts | |||
85 Marathon Cup Holders | Gas EZGO | |||
My DS needs beverage holders! | Electric Club Car | |||
Battery Holders | Electric EZGO | |||
Cup Holders | Electric Club Car |