Curtis 1212P not working in custom cart

jmpratt · 05-20-2021, 09:45 PM

Hello all,
I built a custom cart (mobility scooter thing) with a Curtis 1212P controller. It's 24V, has a 5k pot throttle, and a reverse switch. The 1212P powers up and has a steady green status light, yet when I applied the throttle, no power goes to the wheels. I think it's in some kind of inhibit mode.

Any ideas?

-Jason

bronsonj · 05-25-2021, 10:18 AM

Does the status light flash or the controller beep?
Are you sure the throttle pot is working and connected to the controller?
Did you measure the V to the controller when at 0% throttle and then at 100% throttle?

05-20-2021, 09:45 PM	#1
jmpratt Not Yet Wild Join Date: Mar 2020 Posts: 3	Curtis 1212P not working in custom cart Hello all, I built a custom cart (mobility scooter thing) with a Curtis 1212P controller. It's 24V, has a 5k pot throttle, and a reverse switch. The 1212P powers up and has a steady green status light, yet when I applied the throttle, no power goes to the wheels. I think it's in some kind of inhibit mode. Any ideas? -Jason
jmpratt Not Yet Wild Join Date: Mar 2020 Posts: 3

05-25-2021, 10:18 AM	#2
bronsonj Gone Wild Join Date: Jan 2013 Location: Saint Petersburg, FL Posts: 2,089	Re: Curtis 1212P not working in custom cart Does the status light flash or the controller beep? Are you sure the throttle pot is working and connected to the controller? Did you measure the V to the controller when at 0% throttle and then at 100% throttle?

Similar Threads
Thread	Forum
1/2 speed not working on DS 99 with 1205-203 Curtis	Electric Club Car
WTB Curtis 1204 0-5K WORKING or NOT	Golf Carts and Parts
Curtis LED Indicator Not working Properly	Electric EZGO
WTB - Non-Working Curtis 1204/1205 Controller(s)	Golf Carts and Parts
Curtis hand help not working right?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum