Need more torque and speed.

popper · 04-11-2010, 01:12 AM

Have a 1997 EZ-GO gasser and I use it to pull our two drag cars at the track. The car it pulls most is a Rear engine dragster that weighs about 1800 lbs but occasionally will need to pull a 2800 lb door car. Do I have to go the BBlock route or are ther some other mods that would get me the results I am looking for? I don't need to go 40 mph but 15-20 would be nice.

Thanks in advance. Popper

ruredy · 04-12-2010, 07:17 AM

You should be able to pull that around the track without a problem, shorter belt and adjusted gov would be the thing to do. (easy 20mph+) maybe the 28deg driven clutch, that kinda depends on where your trying to pull it

WILD-BILL · 04-12-2010, 10:11 AM

I agree,

I've pulled full weight door cars with no problems at all even when my cart was stock. Unless your motor is worn out the Gov adjustment and belt would be the way to go.

popper · 04-12-2010, 02:49 PM

People have mentioned a shorter belt. Can I get this though a dealer? How much shorter do you buy? I think I may have the clutch reworked also. I have had it for four years and not had to do anything other than change the oil. But they thing has never gotten up much speed when pulling. Where do I find info about adjusting the governor?

Thanks Popper

WILD-BILL · 04-12-2010, 09:43 PM

Info for the belt can be found here

http://www.buggiesgonewild.com/ezgo-...en-clutch.html

And the Gov adjustment here

http://www.buggiesgonewild.com/ezgo-...4-strokes.html

popper · 04-12-2010, 10:24 PM

Wild Bill,
Thank You very much
Popper

COURTESYCART · 04-13-2010, 12:00 PM

you may want to look into adjusting the valves. they are bad about tightning up over time. I recommend you adjust them evey time you change oil. takes about 10 minutes to do.

WILD-BILL · 04-13-2010, 08:41 PM

What happened to that thread about installing an oil cooler?

I'm bettin he could use that info as well.

04-11-2010, 01:12 AM	#1
popper Not Yet Wild Join Date: Sep 2008 Posts: 57	Need more torque and speed. Have a 1997 EZ-GO gasser and I use it to pull our two drag cars at the track. The car it pulls most is a Rear engine dragster that weighs about 1800 lbs but occasionally will need to pull a 2800 lb door car. Do I have to go the BBlock route or are ther some other mods that would get me the results I am looking for? I don't need to go 40 mph but 15-20 would be nice. Thanks in advance. Popper
popper Not Yet Wild Join Date: Sep 2008 Posts: 57

04-12-2010, 07:17 AM	#2
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: Need more torque and speed. You should be able to pull that around the track without a problem, shorter belt and adjusted gov would be the thing to do. (easy 20mph+) maybe the 28deg driven clutch, that kinda depends on where your trying to pull it

04-12-2010, 10:11 AM	#3
WILD-BILL Gone Wild Join Date: Jun 2009 Location: BROOK PARK, OH Posts: 194	Re: Need more torque and speed. I agree, I've pulled full weight door cars with no problems at all even when my cart was stock. Unless your motor is worn out the Gov adjustment and belt would be the way to go.

04-12-2010, 02:49 PM	#4
popper Not Yet Wild Join Date: Sep 2008 Posts: 57	Re: Need more torque and speed. People have mentioned a shorter belt. Can I get this though a dealer? How much shorter do you buy? I think I may have the clutch reworked also. I have had it for four years and not had to do anything other than change the oil. But they thing has never gotten up much speed when pulling. Where do I find info about adjusting the governor? Thanks Popper
popper Not Yet Wild Join Date: Sep 2008 Posts: 57

04-12-2010, 09:43 PM	#5
WILD-BILL Gone Wild Join Date: Jun 2009 Location: BROOK PARK, OH Posts: 194	Re: Need more torque and speed. Info for the belt can be found here http://www.buggiesgonewild.com/ezgo-...en-clutch.html And the Gov adjustment here http://www.buggiesgonewild.com/ezgo-...4-strokes.html

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-12-2010, 10:24 PM	#6
popper Not Yet Wild Join Date: Sep 2008 Posts: 57	Re: Need more torque and speed. Wild Bill, Thank You very much Popper
popper Not Yet Wild Join Date: Sep 2008 Posts: 57

04-13-2010, 12:00 PM	#7
COURTESYCART Gone Wild Join Date: Nov 2008 Location: Montgomery, AL Posts: 1,463	Re: Need more torque and speed. you may want to look into adjusting the valves. they are bad about tightning up over time. I recommend you adjust them evey time you change oil. takes about 10 minutes to do.

04-13-2010, 08:41 PM	#8
WILD-BILL Gone Wild Join Date: Jun 2009 Location: BROOK PARK, OH Posts: 194	Re: Need more torque and speed. What happened to that thread about installing an oil cooler? I'm bettin he could use that info as well.

Similar Threads
Thread	Forum
Torque vs. Speed	Electric EZGO
speed or torque??	Electric EZGO
Speed or Torque? I want both!	Electric Club Car
Low Speed Torque Gears	Electric EZGO
Speed vs. Torque	Extreme DC!