|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-01-2017, 02:31 PM | #1 |
Getting Wild
Join Date: May 2017
Location: Lynchburg, Va
Posts: 81
|
Wire harness questions.
Hello,
I wish to make my precedent completely street legal by adding the premium update kit for brake light kit, horn, and turn signals. The kit seems complete and should hopefully be a plug and play scenario. I have added a voltmeter and I know the harness used for the light kit has a 9 prong free for additional features. When I was probing around on YouTube, the folks used 2 female spades located behind the front light bar for the horn hookup. Seemed reasonable, but when I used a multimeter I didn't find any voltage to it with key on or off. Am I missing something? It's not a complete headache to run it to a 12 volt battery, but I'd like the tidiest setup possible... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-01-2017, 04:21 PM | #2 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Wire harness questions.
The turn-signal upgrade plugs to the 9-pin connector from the light harness.
It should also have the wires for the horn connection if you have that option. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wire harness for TXT | Gas EZGO | |||
RXV wire harness ? | Electric EZGO | |||
Excel wire harness the same as IQ? | Electric Club Car | |||
need a wire harness | Golf Carts and Parts |