Throttle Rate vs Speed/Torque Curves - Alltrax?

jbsmith05 · 08-08-2017, 07:52 PM

Quote:

Originally Posted by scottyb

Simply changing from street to turf usually resolves harsh throttle complaints. Turf mode softens throttle response so when you are on the golf course (the TURF) the cart will not lurch ahead and damage the TURF

I hope this helps

I was reading about that today...gonna give it a shot.

scottyb · 08-08-2017, 07:55 PM

Quote:

Originally Posted by jbsmith05

I was reading about that today...gonna give it a shot.

I bet you will like it.

TahoeDawgZ71 · 08-09-2017, 03:47 PM

Quote:

Originally Posted by jbsmith05

Is it the one you sent me...I'm Jeff :)

Its much better but still hits hard, i may just tweak the curve down some.

I know who you are. Sorry. I sold 8 or 9 of those in the last week or so and couldn't remember who I sent the file to and who I didn't.

jbsmith05 · 08-09-2017, 04:39 PM

Quote:

Originally Posted by Gregorio

These are my settings. http://www.buggiesgonewild.com/elect...ml#post1417859

I'm very happy with this le el of performance except speed holding on the big hills. A new torque motor will fix that

Mind sharing your torque curve/numbers too? I just tried your speed curve and after a couple tweaks for my area it worked well!!

Also anyone know what "turbo" does specifically? Manual doesn't elaborate much.

Sergio · 08-09-2017, 05:07 PM

The "turbo" function on the XCT controllers is supposed to increase both the low end torque and the high speed based on the speed sensor information.

Gregorio · 08-09-2017, 05:40 PM

torque.jpg

Here you go. Glad it helped. It is almost exactly how scottyb programmed it for me from the beginning. After making a ton of changes, I slowly moved back to this. I am thinking of trying more data points one day but everyone is enjoying the cart so much right now, it would be a shame to mess with it.

jbsmith05 · 08-09-2017, 05:51 PM

Quote:

Originally Posted by scottyb

I bet you will like it.

Worked great!

jbsmith05 · 08-09-2017, 05:54 PM

Quote:

Originally Posted by Gregorio

Attachment 157349

Here you go. Glad it helped. It is almost exactly how scottyb programmed it for me from the beginning. After making a ton of changes, I slowly moved back to this. I am thinking of trying more data points one day but everyone is enjoying the cart so much right now, it would be a shame to mess with it.

Thanks i got close to this manually. Thanks ill use this as a baseline!

Gregorio · 08-09-2017, 05:54 PM

Enjoy the power and speed!

08-09-2017, 05:07 PM	#15
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: Throttle Rate vs Speed/Torque Curves - Alltrax? The "turbo" function on the XCT controllers is supposed to increase both the low end torque and the high speed based on the speed sensor information.

08-09-2017, 05:40 PM	#16
Gregorio Gone Wild Join Date: Apr 2015 Location: NorCal Posts: 718	Re: Throttle Rate vs Speed/Torque Curves - Alltrax? torque.jpg Here you go. Glad it helped. It is almost exactly how scottyb programmed it for me from the beginning. After making a ton of changes, I slowly moved back to this. I am thinking of trying more data points one day but everyone is enjoying the cart so much right now, it would be a shame to mess with it.

08-09-2017, 05:54 PM	#19
Gregorio Gone Wild Join Date: Apr 2015 Location: NorCal Posts: 718	Re: Throttle Rate vs Speed/Torque Curves - Alltrax? Enjoy the power and speed!

Similar Threads
Thread	Forum
FNKS switch modes and throttle curves	Electric Club Car
G29 - Alltrax Throttle Curves	Electric Yamaha
alltrax 500 vs curtis 500 iq precedent speed/torque	Electric Club Car
Alltrax DCX400 Speed and Torque Question	Electric EZGO
Throttle UP and Down rate on AllTrax	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum