|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-03-2017, 07:01 PM | #1 |
Not Yet Wild
Join Date: Sep 2017
Posts: 20
|
Torque specs, 2000 Carryall 2
I have a 2000 CC Carrryall 2 that i'm working on (front suspension/steering to be specific). I'm replacing bushings on the front leaf spring as well as the spindle (some call it the control arm). I also am replacing all the tie rods. Problem is, I only have the illustrated parts list which provides no torque specs for any of these parts. I'm hoping someone could either provide them or point me in the direction to get those.
I'm needing torque specs for: King pin nut (king pin to control arm) King pin to leaf spring (some call it the clevis) Tie rods Wheel hub assembly nut Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-06-2017, 03:25 PM | #2 |
Gone Wild
Join Date: Dec 2010
Posts: 488
|
Re: Torque specs, 2000 Carryall 2
Torque : Kingpin to spring 15ft-lb (23Nm)
Kingpin Nut 40ft-lb (54.2Nm) Tie Rod ball joints 18ft-lb (24.4Nm) Wheel Hub - Tighten spindle nut until the hub is hard to turn, then back the nut off until the hub turns freely, install new cotter pin. |
|
|
Similar Threads | ||||
Thread | Forum | |||
torque specs | Gas EZGO | |||
G1 torque specs | Gas Yamaha | |||
Torque Specs | Gas EZGO | |||
Torque specs | Gas Club Car | |||
g-8&9 gas torque specs | Gas Yamaha |