lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center
Design Center Shop tools, fabrication and Paint and Body

Post New Thread  Reply
Thread Tools Display Modes
Old 07-29-2012, 06:34 PM   #1
Not Yet Wild
vanillagorilla's Avatar
Join Date: Dec 2011
Location: tifton,ga
Posts: 52
Default 02 ezgo pds lifted steering ???'s

i am building a front lift for my cart. i lowered the mounting point of the springs 6". i already have a 5" drop axle. when doing this i was gonna extend the steering shaft but the ears of the yoke hit at this angle. my question is... is it better to build a bracket and angle the steering assembly towards the steering shaft to minimize the angle or....
use tubing to make spacers to lift the steering assembly back up to the original height, thanks!!
vanillagorilla is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Design Center

Thread Tools
Display Modes

Similar Threads
Thread Forum
ezgo Steering Box Electric EZGO
ezgo steering Lifted Golf Carts
91 Ezgo steering help Electric EZGO
steering box on 92 ezgo Electric EZGO
EZGO steering Electric EZGO

All times are GMT -5. The time now is 07:40 PM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of 2006-2017 All rights reserved.