The Sleeper.....(Updated)

boosted 230 · 03-04-2009, 08:24 PM

I know... i know.... the bit i used started to walk around on me.... you cant see it unless you look real close, so im ok with it......

groundpounder · 03-04-2009, 08:34 PM

looks good

smallblock450sl · 03-04-2009, 08:37 PM

Cool car. Were'd you get the tach, what kind is it? Hope all the cops you run into are as nice as the last one. Later Dave

TheNewGuy · 03-04-2009, 08:43 PM

Nice cart!

boosted 230 · 03-04-2009, 08:52 PM

Quote:

Originally Posted by smallblock450sl

Cool car. Were'd you get the tach, what kind is it? Hope all the cops you run into are as nice as the last one. Later Dave

I got it from a place called Harbor Freight.... it was only like 20bucks...

gwoolsey56 · 03-17-2009, 08:16 AM

what did you hve to do to make that tach work? on the instruction sheet it states Move the cylinder selection switch to match the number of cylinders on the vehicle
(4, 6, or

. did it have a setting for 2 cylinders?

boosted 230 · 03-17-2009, 08:52 PM

Quote:

Originally Posted by gwoolsey56

what did you hve to do to make that tach work? on the instruction sheet it states Move the cylinder selection switch to match the number of cylinders on the vehicle
(4, 6, or

. did it have a setting for 2 cylinders?

Mine is set on four... but when you hook it up just run the green wire (im pretty sure its all the same on most tach's)but.... just run that green wire to the wire coming from the magnito... then add the power and ground.. then your set to go!

03-04-2009, 08:24 PM	#1
boosted 230 Getting Wild Join Date: Sep 2008 Posts: 103	The Sleeper.....(Updated) I know... i know.... the bit i used started to walk around on me.... you cant see it unless you look real close, so im ok with it......
boosted 230 Getting Wild Join Date: Sep 2008 Posts: 103

03-04-2009, 08:34 PM	#2
groundpounder Gone Wild Join Date: Sep 2007 Location: maine Posts: 3,352	Re: The Sleeper.....(Updated) looks good

03-04-2009, 08:37 PM	#3
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,874	Re: The Sleeper.....(Updated) Cool car. Were'd you get the tach, what kind is it? Hope all the cops you run into are as nice as the last one. Later Dave

03-04-2009, 08:43 PM	#4
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,046	Re: The Sleeper.....(Updated) Nice cart!
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

03-17-2009, 08:16 AM	#6
gwoolsey56 Not Yet Wild Join Date: Aug 2008 Location: Boonville, IN Posts: 26	Re: The Sleeper.....(Updated) what did you hve to do to make that tach work? on the instruction sheet it states Move the cylinder selection switch to match the number of cylinders on the vehicle (4, 6, or . did it have a setting for 2 cylinders?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
New Updated Pic's	On Road Golf Carts!
Updated Video Section	Videos
The sleeper.....	Members Rides
Updated to 4 ga. cable -QUESTION-	Electric EZGO
Updated Pic's 80 EZGO	Gas EZGO