|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
05-28-2009, 12:09 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2009
Location: San Antonio/Seadrift Texas
Posts: 69
|
G16 main jet
Does anyone know whats the largest size main jet you can safely run without messing with the exhaust on a 1998 301cc G16. Looking for a little bit more power.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-28-2009, 12:13 PM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 main jet
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-28-2009, 12:20 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2009
Location: San Antonio/Seadrift Texas
Posts: 69
|
Re: G16 main jet
I have a small box full of jets and I just wanted to get close.
|
|
|
|
|
05-28-2009, 01:26 PM
|
#4 |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: G16 main jet
I was thinking it was .046 but I'm not positive.
|
|
|
|
|
|
|
|
05-28-2009, 02:12 PM
|
#5 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 main jet
.046 is what I used in my G9 285cc engine. Check the size in there now and put one in that is a few thousands larger. It don't take much.
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-28-2009, 02:15 PM
|
#6 | |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: G16 main jet
Quote:
 And I thought I was getting old too. I hope boo don't see this post.  |
|
|
|
||
|
|
|
|
05-28-2009, 02:16 PM
|
#7 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 main jet
I'll PM her a link!!
 |
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
05-28-2009, 02:22 PM
|
#8 | |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: G16 main jet
Quote:
|
|
|
|
||
|
|
|
|
05-28-2009, 02:38 PM
|
#9 | |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: G16 main jet
Quote:
|
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
|
|
|
|
05-28-2009, 03:07 PM
|
#10 | |
|
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,871
|
Re: G16 main jet
Quote:
|
|
|
|
||
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| negative main through OBC? | Electric Club Car | |||
| Main Fuse | Electric Club Car | |||
| Main Switch Assembly | Gas Yamaha | |||
| Blown Main Fuse | Gas Yamaha | |||
| MAIN JETS | Gas Yamaha | |||
Linear Mode
