Easiest way to wire up a G1 to start and go!

[g1uncman]

Ok so i will be putting in switches to start jump my solenoids (forward and reverse) off of the battery, easy got that!! I want to know what wires i will need and which i dont need off the ignition just to hot wire this thing to run! I am tire of all these dang wires! I know nothing! I got this thing and it wasnt sparking at the plug... i went outside later in the week and jumped off the battery and it turned over like a miracle.... drove it about 100 ft.. and went to do more work on it, cleaned the carb ect, nothing with the wires, and now... guess what NO SPARK AGAIN! I AM FED UP, what to do now??

[rjeezy3209]

you cant really just hot wire n go so to speak it needs all of the wiring that is there sounds to me like you have a short or something I know it can be frustrating I had the same problem with my cart after I got fed up I went and bought some diff color wire spools and started at point a with each wire and re wired it to point b one at a time until I had the whole cart re wired and haven't had any issues since its the best thing I did for my cart so far it had some really poor and dirty connections thru out the whole wiring harness