|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-07-2014, 01:47 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Location: Illinois
Posts: 2
|
91 marathon input shaft
I just recently acquired a 91 ezgo marathon 2 cycle cart. The person i got it from had some input shaft problems and wound up doing some sort of welding on it, which pretty much threw it off balance, so the cart now has a bit if a vibration in it when driving. Well sure enough, the driven clutch hold down bolt sheared off where it mounts in the input shaft. I have the entire rear end now out of cart, but was hoping to be able to acquire a replacement input shaft. Fat chance on that i have found.
Any chance on anyone having a cart they are parting out? Any other suggestions for a repair? 1991 Ez Go Marathon, 2 cycle gas. i have been told i could use parts from 89 to 91 carts. Of course any help and suggestions are appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-30-2014, 05:12 PM | #2 |
Not Yet Wild
Join Date: Jul 2014
Location: Illinois
Posts: 2
|
Re: 91 marathon input shaft
ok so ...wound up finding an entire rear axle assembly. hopefully all will be good.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
1992 Marathon Input Shaft | Electric EZGO | |||
wanted 1991 ez go marathon input shaft | Golf Carts and Parts | |||
G16 input shaft | Gas Yamaha | |||
G9 Input Shaft? | Gas Yamaha | |||
need input shaft for G2 | Golf Carts and Parts |