|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-10-2017, 06:54 PM | #1 |
Not Yet Wild
Join Date: Dec 2010
Posts: 2
|
90 ezgo carb part identification
Can someone please help by identifying the small brass pin (with hole), located just above and to the left of the choke lever in the attached picture. Newly purchased carb came with a small diameter tube attached. I can't find any reference to it in the manuals. Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-10-2017, 07:42 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: 90 ezgo carb part identification
Float bowl vent. The plastic tube directs leaked fuel overboard, but doesn't work because the hole is drilled in the side of the brass fitting. The Chinese haven't quite figured that out yet.
|
09-10-2017, 08:39 PM | #3 |
Not Yet Wild
Join Date: Dec 2010
Posts: 2
|
Re: 90 ezgo carb part identification
Thanks for the info. Even though I didn't know what it was I thought it
odd that the tube was a tight friction fit over the hole. There was no way it could function that way. Thanks again. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Part identification????? | Electric Club Car | |||
Help with steering part identification | Gas EZGO | |||
92 ezgo..new carb..Part Missing? | Gas EZGO |