|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
05-05-2013, 06:56 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2013
Posts: 2
|
G2 rebuild questions
My trusty 1987 G2 got borrowed and came home seized up
 . No biggie . I pulled the motor and tore it down. The oil slinger broke and spun the connecting rod bearing. My question is two parts: (1) can I get the crank machined and get bigger bearings? or (2) can I just polish the crank with emery cloth and put the OEM bearings in?Thanks in advance, Mike |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| More questions from my 295 motor rebuild | Gas EZGO | |||
| Few questions for G9 rebuild. | Gas Yamaha | |||
| 1990 EZ-GO rebuild & questions | Gas EZGO | |||
| G9 stock rebuild questions | Gas Yamaha | |||
| Carb Rebuild and other questions 295 | Gas EZGO | |||
Threaded Mode