09-29-2009, 07:39 AM | #1 |
Getting Wild
Join Date: Sep 2009
Location: Johnson city, Tn.
Posts: 89
|
Melex, resistor stlyle, speed selector cables
I am trying to find the 4 cables that go from the stationary contact on the selector board to the resistor. It appears that all four are about 6" long hole to hole.
Two of mine have a heat resistant sleeve on them and two do not. The two that do not are completely shot and the two that have the sleeve really need replacing also. I am really having a hard time finding these four cables. I e-mailed a cable company to see if they can make them and am waiting on a response. They are not hi-tech cables, just cables with a sleeve on them. These cables look to be 6 gauge. Is this right? I am planning on replacing them with 4 gauge, is this safe? My cart is a Melex 252. I believe it to be a '85 or '86 model, not sure. The serial number is 188748. I took pics yesterday for you guys but I just moved and can't find my card reader yet. I will try again tonight. Thanks guys, Neal |
|
|
Similar Threads | ||||
Thread | Forum | |||
Melex 36 Volt Cart only goes at slow speed | Melex | |||
Selector | Electric EZGO | |||
EMP 2 Speed motor MELEX - EZGO | Golf Carts and Parts | |||
1979 Ezgo 36v resistor cart cables | Electric EZGO | |||
need help with Melex resistor | Melex |