3A fuse blows immediately switching tow to run

scottyb · 05-10-2018, 09:16 AM

Alltrax confirms 10a may be needed.

From Alltrax "True, it doesn’t look like that fuse upgrade was added to the YDRE schematic, I’ll get that fixed and updated. But yes, if you have a stock 3A fuse between tow/run and battery we (Alltrax) suggests upgrading to 10A to prevent it from popping."

Upon further investigation I'm not finding this fuse in my 2013. What years have the R/T switch fuse?

JakeJones8 · 05-10-2018, 11:23 AM

Scotty, I got the same response... guess we will throw the 10a in there and I’ll take a cool picture if it sets on fire!

Also, even though it shows in the manual that the 2013 should have the 3a fuse, we have already proved that manual is wrong ha. My best guess is in 2011 when they switched up the body a litttle and added the 8x6 trays, they must have eliminated the fuse?

Thanks everyone for the help, I will update here if the 10a solves my problems!

cgtech · 05-10-2018, 11:47 AM

Nope, they all still had the 3a fuse.

JakeJones8 · 05-10-2018, 05:26 PM

Just threw in a 10a 32vdc and it turned right on! CGTECH FTW and shame on Alltrax for not mentioning this and including a fuse... week of wasted riding ;)

I am going to leave in in the "Run" position for the next few hours and monitor for fire

but I think we are good to go. Thanks Scotty for your help as well

05-10-2018, 09:16 AM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 3A fuse blows immediately switching tow to run Alltrax confirms 10a may be needed. From Alltrax "True, it doesn’t look like that fuse upgrade was added to the YDRE schematic, I’ll get that fixed and updated. But yes, if you have a stock 3A fuse between tow/run and battery we (Alltrax) suggests upgrading to 10A to prevent it from popping." Upon further investigation I'm not finding this fuse in my 2013. What years have the R/T switch fuse?

05-10-2018, 11:23 AM	#12
JakeJones8 Getting Wild Join Date: May 2017 Location: Dallas, TX Posts: 116	Re: 3A fuse blows immediately switching tow to run Scotty, I got the same response... guess we will throw the 10a in there and I’ll take a cool picture if it sets on fire! Also, even though it shows in the manual that the 2013 should have the 3a fuse, we have already proved that manual is wrong ha. My best guess is in 2011 when they switched up the body a litttle and added the 8x6 trays, they must have eliminated the fuse? Thanks everyone for the help, I will update here if the 10a solves my problems!

05-10-2018, 11:47 AM	#13
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: 3A fuse blows immediately switching tow to run Nope, they all still had the 3a fuse.

05-10-2018, 05:26 PM	#14
JakeJones8 Getting Wild Join Date: May 2017 Location: Dallas, TX Posts: 116	Re: 3A fuse blows immediately switching tow to run Just threw in a 10a 32vdc and it turned right on! CGTECH FTW and shame on Alltrax for not mentioning this and including a fuse... week of wasted riding ;) I am going to leave in in the "Run" position for the next few hours and monitor for fire but I think we are good to go. Thanks Scotty for your help as well

Similar Threads
Thread	Forum
Fuse Continuously blows	Gas EZGO
g-2 blows fuse	Gas Yamaha
Gas carryall blows fuse when trying to start...HELP	Gas Club Car
Hit the horn and main fuse blows	Electric EZGO
98 gas club car blows fuse	Gas Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum