How do I remove the driven clutch?

[Barry]

Hi,

1994 gas Ez-Go

My driven clutch was all jammed up. I couldn't move the sheave at all. I removed the bolt that holds it to the shaft and pulled and tugged, no go.

I gently hit it with a rubber mallet, still no go. Tons of sand/dust/dirt came out of it with each tap. The sheave finally moves now, but I'd still like to take it off and clean it out.

How do these things come off the shaft?? Do I need a puller, similar to the ones used to remove the drive clutch??

Thanks,

Barry

[Barry]

Originally Posted by Barry

Hi,

1994 gas Ez-Go

My driven clutch was all jammed up. I couldn't move the sheave at all. I removed the bolt that holds it to the shaft and pulled and tugged, no go.

I gently hit it with a rubber mallet, still no go. Tons of sand/dust/dirt came out of it with each tap. The sheave finally moves now, but I'd still like to take it off and clean it out.

How do these things come off the shaft?? Do I need a puller, similar to the ones used to remove the drive clutch??

Thanks,

Barry

Answer: Gently use a pry bar and slide it off the splined shaft. haha

I got it off. Now I just have to figure out how to get the sheaves apart.

Barry