wheel spacers

kirksingleton · 02-23-2015, 12:59 AM

those are the ones I used. I think all 4 were $90 shipped. They came asap. Comes with nuts and you reuse your existing lugs. I only needed 1" per wheel.

smokindawg · 02-23-2015, 08:22 AM

When I bought my billet spacers on ebay, they didn't take actual lug nuts to hold them on. They used a lock type nut with flat washer built into the nut. There are some spacers better than others but you'll also pay more for them too.

stuff4mason · 02-23-2015, 09:11 AM

Quote:

Originally Posted by 93yellowclubcar

http://www.ebay.com/itm/2-5-YAMAHA-G...-/121554364116

These are the spacers in question I believe. These are really nice, I've got some in the non-Yami version and I really like them, VERY nice pieces. 2.5" is as wide as that seller makes, but plenty wide IMO.

Yep! That's them. I don't think you can beat that price anywhere. I thought about buying 1 1/2" spacers and stacking, but this cost is so low, there was no sense. Some of these guys who are selling the 3" Jakes think they are made of gold, as some prices are sky high!

motojoe1988 · 02-23-2015, 05:01 PM

Do I need metric 12? Or 1/2? Ordering from jakes

stuff4mason · 02-23-2015, 05:27 PM

Quote:

Originally Posted by motojoe1988

Do I need metric 12? Or 1/2? Ordering from jakes

Depends on what cart you have.

motojoe1988 · 02-23-2015, 05:58 PM

G2 1990

Dave in VA · 02-23-2015, 06:46 PM

Jakes is sure proud of their spacers

$$

cgtech · 02-23-2015, 07:25 PM

Yamaha is 12mm/1.25 pitch lugnut threads.

02-23-2015, 12:59 AM	#11
kirksingleton Getting Wild Join Date: Jun 2014 Posts: 100	Re: wheel spacers those are the ones I used. I think all 4 were $90 shipped. They came asap. Comes with nuts and you reuse your existing lugs. I only needed 1" per wheel.

02-23-2015, 08:22 AM	#12
smokindawg Gone Wild Join Date: Sep 2012 Location: Missouri Posts: 2,755	Re: wheel spacers When I bought my billet spacers on ebay, they didn't take actual lug nuts to hold them on. They used a lock type nut with flat washer built into the nut. There are some spacers better than others but you'll also pay more for them too.

02-23-2015, 05:01 PM	#14
motojoe1988 Gone Wild Join Date: Jul 2014 Location: Long Beach, CA Posts: 327	Re: wheel spacers Do I need metric 12? Or 1/2? Ordering from jakes

02-23-2015, 05:58 PM	#16
motojoe1988 Gone Wild Join Date: Jul 2014 Location: Long Beach, CA Posts: 327	Re: wheel spacers G2 1990

02-23-2015, 06:46 PM	#17
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	Re: wheel spacers Jakes is sure proud of their spacers $$

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-23-2015, 07:25 PM	#18
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: wheel spacers Yamaha is 12mm/1.25 pitch lugnut threads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Wheel stud spacers / or solid spacers	Gas EZGO
Jakes 2" billet wheel spacers & stud spacers	Golf Carts and Parts
Wheel Spacers???	Electric Club Car
Wheel Spacers- WTT!	Golf Carts and Parts
Will I Need Wheel Spacers?	Lifted Golf Carts