Wire Harness for Yamaha gas golf cart

[Justinmanc]

Hey guys im wondering if anyone can point me in the right direction on where i can find and purchase a new wire assembly for a 1993 Yamaha G9 Golf Cart? Any help will be greatly appreciated!

[CharleyL]

If you can find a schematic or wiring diagram, it may be easy enough to just run the wires needed, cut and add the terminals needed, and then tie it into a harness. If you use tie wraps to form large sized loops and attach them along where the harness would be located, then rout all of the new witing through them as uou install each one. when all of the wiring has been installed and the cart is working again you can close up the loops around the wires and add more tie wraps where needed. You will have created your own wire harness for very little cost. There aren't very many wires involved in these carts so it should be relatively easy. I've done this same thing when rewiring industrial machinery with hundreds of wires involved and it's relatively easy to do if you follow my instructions and only concentrate on doing one wire at a time, until you discover that they are all installed. I use a photo copy of the diagram and just mark on it, highlighting each wire on the diagram as I install it. When all lines have been installed, the diagram has been completely highlighted and you are done. Secure it with tie wraps and then drive it.

Chrley