|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-26-2019, 12:59 PM | #1 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
broke primary sheave
I tried rebuilding motor and broke the primary sheave while trying to remove it
. I prefer not to replace it since it cost well over 200 to fix. Do you think this will be ok? I broke in 3 spots . https://imgur.com/zYGgGLZ https://imgur.com/v3cgxTT https://imgur.com/Z3DKOig |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-26-2019, 01:59 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,593
|
Re: broke primary sheave
The question there is if it will destroy the S/G belt. My guess is probably. Of course S/G belts aren't all that expensive for full bore test. As for the clutch itself you can't kill something that is already dead. Being I hate to pay out money I would try and clean up the sharp spots a see what happens. I would not be where the flying belt might hit me.
|
06-26-2019, 02:43 PM | #3 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: broke primary sheave
Thanks
Sent from my Pixel 2 XL using Tapatalk |
06-26-2019, 06:07 PM | #4 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
|
Re: broke primary sheave
I believe I have just the rear sheave and S/G pulley if you need it.
And add this to lessons learned... clutch puller tools are a good thing... |
06-26-2019, 06:25 PM | #5 |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: broke primary sheave
I had clutch puller. Just connected wrong spot. Boy was it wedged on. You can send me image of what you got. I may be interested in it.
Sent from my Pixel 2 XL using Tapatalk |
06-26-2019, 06:47 PM | #6 |
Nincompoop village idiot
Join Date: Apr 2018
Location: Michigan
Posts: 9,625
|
Re: broke primary sheave
I'm currently halfway across the country traveling for work, but I will be back home tomorrow. I'll try to get you a picture tomorrow night or friday. It's not pretty but it's not broken. You can have it for whatever shipping costs me
|
06-26-2019, 06:48 PM | #7 | |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: broke primary sheave
Quote:
Sent from my Pixel 2 XL using Tapatalk |
|
06-26-2019, 07:06 PM | #8 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: broke primary sheave
I’ve seen worse on steel pulleys. There’s a small chunk next to that that might try to crack out at some point, but I would think you can file or sand down the edges of that and still use it no prob. As long as the belt is aligned properly and doesn’t slip, it shouldn’t cause any issue.
|
06-26-2019, 07:07 PM | #9 | |
Not Yet Wild
Join Date: Jul 2018
Posts: 47
|
Re: broke primary sheave
Quote:
Sent from my Pixel 2 XL using Tapatalk |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G2 primary sheave bolt | Gas Yamaha | |||
G9 (like) primary sheave (clutch) | Gas Yamaha | |||
G1 Primary Sheave Removal - HELP! | Gas Yamaha | |||
Primary sheave | Gas Yamaha | |||
g2 primary sheave | Gas Yamaha |