|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
07-21-2021, 11:18 AM | #1 |
Not Yet Wild
Join Date: Dec 2020
Posts: 8
|
EZGO DCS Solenoid Not Engaging
Hey there fellow golf cart people.
I have a EZGO DCS that the solenoid is not engaging. This is where I'm at: Pin 3 - With forward selected, must equal pack voltage [Yes it does] Pin 3 - With reverse selected, must equal about 0V [No it still equals pack voltage] It say to check wiring but the wiring going to and from the reverse buzzer checks out. Any ideas on what to do next? Thanks Also realized I posted this in the wrong thread... can I edit to move it to EZGO? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-18-2021, 12:46 PM | #2 |
Not Yet Wild
Join Date: Dec 2020
Posts: 8
|
Re: EZGO DCS Solenoid Not Engaging
It ended up being the controller
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2000 ezgo 36v PDS solenoid not engaging | Electric EZGO | |||
Solenoid not engaging. | Electric Club Car | |||
Solenoid not engaging | Electric Club Car | |||
Solenoid not engaging with Forward / Reverse switch? (Solenoid is good) | Electric EZGO | |||
Ezgo PDS won't move, solenoid not engaging. | Electric EZGO |