|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
|
04-03-2015, 11:56 AM | #1 |
Not Yet Wild
Join Date: Jan 2014
Location: South Carolina
Posts: 44
|
Charger cable connectors
Hey guys,
I'm replacing the connectors (both ends) on my golf cart and charger after one of the contacts got hot and melted the housing. It's a 36v old (1995) ezgo. I want to make sure I get a good connection when I crimp the new contacts on. Those contacts look like they are some kind of really hard metal. Any recommendations from the pros? Thanks! |
04-03-2015, 02:13 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: Charger cable connectors
Maybe you could use something like this.
|
04-03-2015, 02:14 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Charger cable connectors
you can solder them on
|
04-03-2015, 02:23 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Charger cable connectors
Solder it.
|
04-03-2015, 04:22 PM | #5 |
Not Yet Wild
Join Date: May 2013
Location: Palmetto Bay, FL
Posts: 29
|
Re: Charger cable connectors
I used a Harbor Freight hydraulic crimper with shrink tubing for my 2 gauge cables. It was fast and it worked perfectly.
|
04-03-2015, 06:22 PM | #6 |
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: Charger cable connectors
Solder
|
|
|
Similar Threads | ||||
Thread | Forum | |||
I need advice on charger connectors | Electric EZGO | |||
Connectors for charger plug 2009 48v RXV | Electric EZGO | |||
Where can I buy a replacement battery charger cable end. | Electric EZGO | |||
2 gauge cable connectors | Electric EZGO | |||
charger cable gets hot? | Electric Club Car |