Micro switch adjustment

Legat · 09-01-2019, 04:30 PM

My 2011 TXT48 started to move when f/r switch was activated and no throttle.
Discovered the micro switch activation wheel on the throttle shaft inside the
floor board housing was loose and rotated clockwise. This resulted in micro switch always activated condition. I adjusted the wheel and applied some blue thread lock. Now it is difficult to get slow/smooth acceleration. Just mashing pedal to metal runs great. How much throttle movement should there be prior to switch activation?

JohnnieB · 09-01-2019, 08:40 PM

Throttle adjustments start on page E-10 in attached service manual.

09-01-2019, 04:30 PM	#1
Legat Not Yet Wild Join Date: Sep 2019 Posts: 1	Micro switch adjustment My 2011 TXT48 started to move when f/r switch was activated and no throttle. Discovered the micro switch activation wheel on the throttle shaft inside the floor board housing was loose and rotated clockwise. This resulted in micro switch always activated condition. I adjusted the wheel and applied some blue thread lock. Now it is difficult to get slow/smooth acceleration. Just mashing pedal to metal runs great. How much throttle movement should there be prior to switch activation?
Legat Not Yet Wild Join Date: Sep 2019 Posts: 1

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Series F/R switch micro switch wiring?	Electric EZGO
Need corresponding colors for micro switch on new FnR switch	Electric Club Car
TXT micro switch ITS or key switch problems	Electric EZGO
Micro switch adjustment	Gas EZGO
Micro Switch issue or F & R switch.	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum