lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car > Lithium Club Car


Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-10-2021, 02:05 PM   #1
Jack Daniels
Not Yet Wild
 
Join Date: Aug 2017
Posts: 32
Default Extreme Team install

Possibly a dumb question, but I am installing a lithium battery from Extreme Team in a 2013 precedent. The ring terminals from the cart are too small so I must cut and install new ones. I'm just curious if anyone knows exactly what size I need to get. Controller and motor are stock.
Jack Daniels is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-10-2021, 03:54 PM   #2
WalterM6
Gone Wild
 
WalterM6's Avatar
Club Car
 
Join Date: Apr 2017
Location: SE TN
Posts: 1,792
Default Re: Extreme Team install

Drill them out.
WalterM6 is offline   Reply With Quote
Old 03-10-2021, 05:18 PM   #3
texasflyer
Not Yet Wild
Club Car
 
Join Date: Nov 2020
Posts: 17
Default Re: Extreme Team install

Holes need to be 3/8". Drill them out as mentioned above or you can buy some 3/8" terminals for 2 gauge cable at autozone.
texasflyer is offline   Reply With Quote
Old 03-10-2021, 07:29 PM   #4
simicrintz
Gone Wild
 
simicrintz's Avatar
Club Car
 
Join Date: Apr 2020
Location: Hurricane, Utah
Posts: 969
Default Re: Extreme Team install

I drilled mine out where needed. Use the proper tool (something like this: https://www.amazon.com/CO-Z-Cobalt-M...5422472&sr=8-2) and not just a big drill bit or you'll wad stuff up (don't ask me how I know)......
simicrintz is offline   Reply With Quote
Old 03-10-2021, 08:13 PM   #5
CP241
Eats dirt.
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 6,210
Default Re: Extreme Team install

A pencil die grinder or dremel with a burr bit works way better so you donít snaggle the terminal.

However in doing so, you remove the finish of the terminal which opens it up for corrosion if itís a tin plated or gold plated terminal.

Other down side to replacing the terminals with proper 3/8 terminals is you need the correct tool to crimp them. Your crusty old stripper/crimper combo ainít gonna cut it. But that is the better way to do it.
CP241 is online now   Reply With Quote
Old 03-11-2021, 10:39 AM   #6
klubber
Gone Wild
Club Car
 
Join Date: Jan 2016
Location: Central Florida
Posts: 260
Default Re: Extreme Team install

I got a short cable to use for SOC from Blake. He advised using a stepdrill to open up ring Terminals. Worked perfect and real easy
klubber is offline   Reply With Quote
Old 03-12-2021, 09:34 AM   #7
irwinj06
Not Yet Wild
 
irwinj06's Avatar
Club Car
 
Join Date: Jun 2017
Location: Ponte Vedra, FL
Posts: 31
Default Re: Extreme Team install

Quote:
Originally Posted by Jack Daniels View Post
Possibly a dumb question, but I am installing a lithium battery from Extreme Team in a 2013 precedent. The ring terminals from the cart are too small so I must cut and install new ones. I'm just curious if anyone knows exactly what size I need to get. Controller and motor are stock.
What size battery did you get from them and do you have pictures of it installed?
irwinj06 is offline   Reply With Quote
Old 03-12-2021, 02:22 PM   #8
Jack Daniels
Not Yet Wild
 
Join Date: Aug 2017
Posts: 32
Default Re: Extreme Team install

Quote:
Originally Posted by irwinj06 View Post
What size battery did you get from them and do you have pictures of it installed?
I got the 48V/100AH version. At work right now so no pics of the install, but looks just like a few that have put the Extreme Team in their Precedent. Fits nicely on the driver's side and leaves a ton of room in the battery compartment.

Also, thanks for the suggestion to use a step up bit and drill it out, worked perfect.
Jack Daniels is offline   Reply With Quote
Old 03-12-2021, 10:43 PM   #9
Jack Daniels
Not Yet Wild
 
Join Date: Aug 2017
Posts: 32
Default Re: Extreme Team install

Couple questions. I had a plug and play light kit and reducer that had this blue wire that attached to a negative post of one of the old batteries. How do I get this to work with the lithium battery? Also this red wire comes out of a group of wires coming from the charging receptical. I guess this one wonít be needed anymore since I am putting in an onboard charger.
Attached Images
File Type: jpg 66184413-54DB-4815-8FF6-C8AAF85D3AF5.jpg (144.9 KB, 0 views)
Jack Daniels is offline   Reply With Quote
Old 03-15-2021, 07:58 PM   #10
irwinj06
Not Yet Wild
 
irwinj06's Avatar
Club Car
 
Join Date: Jun 2017
Location: Ponte Vedra, FL
Posts: 31
Default Re: Extreme Team install

Quote:
Originally Posted by Jack Daniels View Post
Couple questions. I had a plug and play light kit and reducer that had this blue wire that attached to a negative post of one of the old batteries. How do I get this to work with the lithium battery? Also this red wire comes out of a group of wires coming from the charging receptical. I guess this one wonít be needed anymore since I am putting in an onboard charger.
On which batteries were the wires connected to before you took them out? That will determine what voltage you need to reconnect them to. Either 48v or 12v output on the lithium.
irwinj06 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car > Lithium Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Extreme team Lithium batteries? All things Lithium
Extreme Team Lithium Batteries All things Lithium
Nothing to see here. Team Tesla Lithium EZGO
07-14 Team Differential Gas Yamaha
Team clutch Gas EZGO


All times are GMT -5. The time now is 12:16 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.