Lights out on 2008 CC Precedent

[Hecky50]

While charging the other day i decided to check all the lights. The headlights blew out and my brake lights don't work. Signals work as well as 4 way flashers. The fuse under the seat which powers the whole system is good (turn Sig). Is there another fuse somewhere else on these carts.
This appears to be a factory lighting setup as the main power wire goes into the loom.
Any help is appreciated.

[Hecky50]

Update.... headlights overloaded and blew out. Discovered after checking output with DVM. Cart shop owner says the circuit board may be fried in the tail lights. Won't no till tomorrow after checking the power leads. Could also be the switch down near the pedal.

[jroeiii]

I have the same issue although much older model (96 CC 48v) ... replaced headlights, all good again. Tail lights and turn signals are good, but no brake lights when pedal depressed. They have worked before, but it's been sitting for quite some time.

I believe there is a relay and then the micro switch(es) on/near the brake pedal which would activate the second filament in the tail lights.

How did you go out resolving your issue? Any advice appreciated.

[Hecky50]

Sorry to say the brake lights started working again. Don't really know why. After removing the carpet and the plastic cover i checked all the wiring,all was good. There were three items that appear to be the brake circuit. Switch,i believe the relay and another small box with a button on top. I could not find on the schematic that showed this box. Still don't know what it does. Good luck