94 Electric EZGO Won't Go. Where to start with diagnosis?

fire4034 · 04-21-2014, 10:42 AM

Can you give me an exact one that you would recommend? Also do I need to
Replace the two diodes / resistors in the Solenoid?

JohnnieB · 04-21-2014, 11:07 AM

Quote:

Originally Posted by fire4034

Can you give me an exact one that you would recommend? Also do I need to
Replace the two diodes / resistors in the Solenoid?

If there is the slightest possibility you may up the pack voltage to 42V or 48V at a later date, go with the Super-Duty (400A continuous / 1000A peak) 48V solenoid near the bottom of this webpage. If you know you'll be staying at 36V, get the Heavy-Duty (200A/800A) 36V solenoid shown.
http://www.cartsunlimited.net/Custom_Options.html

The Resistor and Diode come with the solenoids and how to install is shown at the bottom of the webpage

fire4034 · 04-22-2014, 10:47 AM

Thanks so much for all of the info! It will be here this week and hope to be back on the road again.

Frank

fire4034 · 04-23-2014, 11:18 PM

Thanks JohnnieB and everyone who helped me in this thread! New solenoid installed today, and back on the road again! It was great to learn how to track down the problem myself, and then fix the problem! Thanks again to all that helped!
Frank

JohnnieB · 04-24-2014, 08:20 AM

Gand to hear you got it going.
Thanks for the feedback

scottyb · 04-24-2014, 08:38 AM

Quote:

Originally Posted by JohnnieB

Gland to hear you got it going.
Thanks for the feedback

Spell-check isle 4

JohnnieB · 04-24-2014, 08:56 AM

Quote:

Originally Posted by scottyb

Spell-check isle 4

I already have a spelling checker, but I do need a proof reader.

Thanks.

04-21-2014, 10:42 AM	#21
fire4034 Not Yet Wild Join Date: Oct 2012 Posts: 49	Re: 94 Electric EZGO Won't Go. Where to start with diagnosis? Can you give me an exact one that you would recommend? Also do I need to Replace the two diodes / resistors in the Solenoid?
fire4034 Not Yet Wild Join Date: Oct 2012 Posts: 49

04-22-2014, 10:47 AM	#23
fire4034 Not Yet Wild Join Date: Oct 2012 Posts: 49	Re: 94 Electric EZGO Won't Go. Where to start with diagnosis? Thanks so much for all of the info! It will be here this week and hope to be back on the road again. Frank
fire4034 Not Yet Wild Join Date: Oct 2012 Posts: 49

04-23-2014, 11:18 PM	#24
fire4034 Not Yet Wild Join Date: Oct 2012 Posts: 49	Re: 94 Electric EZGO Won't Go. Where to start with diagnosis? Thanks JohnnieB and everyone who helped me in this thread! New solenoid installed today, and back on the road again! It was great to learn how to track down the problem myself, and then fix the problem! Thanks again to all that helped! Frank
fire4034 Not Yet Wild Join Date: Oct 2012 Posts: 49

04-24-2014, 08:20 AM	#25
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: 94 Electric EZGO Won't Go. Where to start with diagnosis? Gand to hear you got it going. Thanks for the feedback Last edited by JohnnieB; 04-24-2014 at 08:53 AM.. Reason: Spelling

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Where to start with EZGO Marathon Electric Restoration	Electric EZGO
2 stroke 86 1/2. No start diagnosis help.	Gas EZGO
EZGO Software/diagnosis	Electric EZGO
Battery diagnosis - 2004 ezgo 36 volt series cart	Electric EZGO
85 Electric EZGO Cart wont start	Electric EZGO